1. Is Landscaping An “Essential Business” In Your Region?
    Read the timely article from Turf addressing this question. Click here to learn more.

    COVID-19 Safety Procedures For Landscapers
    As you are working out in the field, maximize safety for you, your crews, and customers. Click here to learn more.

    Dismiss Notice

fish stick not working properly

Discussion in 'Fisher Engineering Discussion' started by 6.0superduty, Mar 26, 2020.

  1. 6.0superduty

    6.0superduty Junior Member
    Messages: 6

    I have two of the older style fish stick controllers one everything works but it won't go down. the other one every button makes the plow go right. any help is appreciated.
     
  2. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,580

    straight blade 3 plug??
     
  3. OP
    OP
    6.0superduty

    6.0superduty Junior Member
    Messages: 6

    yes
     
  4. Western1

    Western1 PlowSite.com Addict
    from MI.
    Messages: 1,861

    Blade going right can be a stuck four way valve. Pretty sure the one with the blue wire connected to it
     
  5. Randall Ave

    Randall Ave PlowSite Fanatic
    Messages: 10,919

    Both controllers on the same plow?
     
  6. Western1

    Western1 PlowSite.com Addict
    from MI.
    Messages: 1,861

  7. Western1

    Western1 PlowSite.com Addict
    from MI.
    Messages: 1,861

  8. OP
    OP
    6.0superduty

    6.0superduty Junior Member
    Messages: 6

    It's not the valve because I plugged a buddies controller in and it works fine
     
  9. OP
    OP
    6.0superduty

    6.0superduty Junior Member
    Messages: 6

    Yes
     
  10. Randall Ave

    Randall Ave PlowSite Fanatic
    Messages: 10,919

    Remove the screws and remove the circuit board. Then remove the rubber touch pad. Using a pencil eraser, very gently clean all the contact areas. If anything on the circuit board looks burnt, its toast.
     
  11. OP
    OP
    6.0superduty

    6.0superduty Junior Member
    Messages: 6

    Ok I'll try that
     
  12. Randall Ave

    Randall Ave PlowSite Fanatic
    Messages: 10,919

    There has to be some U tube on it.
     
  13. Western1

    Western1 PlowSite.com Addict
    from MI.
    Messages: 1,861

    You can also use a spray electrical cleaner.
     
  14. OP
    OP
    6.0superduty

    6.0superduty Junior Member
    Messages: 6

    Still doesn't work
     
  15. Avalanche 2500

    Avalanche 2500 Senior Member
    Messages: 860