1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

EZ-V dim lights ?

Discussion in 'Fisher Engineering Discussion' started by samjr, Jan 24, 2012.

  1. samjr

    samjr Senior Member
    Messages: 481

    I did all the stuff on here and my lights still go dim ?The only thing i did not do was the ground from the main bat is that a big deal? +Put a 200 amp alt on. I am getting a vid up now for u all to see.I took my truck with the plow on today to a shop and the guy did some kinda test :eek: 1 bat was dead and the other was on its way out.So they both under war so took them back and got 2 new bats @ 880 CCA.+the guy said the plow pulls 180amps @ start and drops down to 120 amps.I just want to know does this look right to u GM chev guys on the volts on the dash, light dim a bit and the heater slows a bit.
    O ya the guy said too my 200amp alt from ebay was only putting out 80 amps and 180 @2200rpm.I called the the place on ebay and they said he tested it worng.But if i want to send it back they well send me a bigger 1 :mad:



    Just showing my - wire from bat to block to frame
    Last edited: Jan 24, 2012
  2. Pinzgauer

    Pinzgauer Senior Member
    from Vermont
    Messages: 134

    Are they only dimming when you run the plow or always?
    I had that happen on my V and it was a bad relay on the plow.
  3. samjr

    samjr Senior Member
    Messages: 481

    all new

    New motor and solenoid