1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Ez-V controler

Discussion in 'Fisher Engineering Discussion' started by RLM, Feb 23, 2011.

  1. RLM

    RLM PlowSite.com Addict
    Messages: 1,270

    Where is the best (cheapest) place to get a new one, we just had the button rip off one. Dealer wants almost $ 400, CPW $ 325.
  2. Nasty-Z

    Nasty-Z Senior Member
    Messages: 370

    P/M GotH2O on this board , he had a few in the past at a killer price.:)

    Western1 may also be able to help you out with a controller.:)

  3. mrv8outboard

    mrv8outboard Senior Member
    Messages: 205

    If it is just the rubber button? Just replace the key pad, like 26.00 bucks.
  4. Flipper

    Flipper PlowSite.com Addict
    from CT
    Messages: 1,180

    Is it a joystick or handheld? You can get parts for both for less. Just replace what's needed. I prefer the joystick and just replaced the circuit board for $150 as the contacts were getting bad. Works like new again.

    Go to Fisher's site into the parts and get a PDF exploded view of the controller you have. Then you can type in the part numbers to CPW for example.