1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice


Discussion in 'Meyer / Diamond Products Discussion' started by pldann86, Jan 24, 2016.

  1. pldann86

    pldann86 Member
    from LI NY
    Messages: 72

    When plow go's lock to lock it's stuck both ways,have to wack the curb to free it. If you keep it from going full turns no problem.
    Cross over maybe?
  2. kimber750

    kimber750 PlowSite Veteran
    Messages: 4,676

    Valve, quick connects or plow binding.
  3. Nasty-Z

    Nasty-Z Senior Member
    Messages: 370

    Stops are worn off of the Sector , thus over collapsing the angling rams blocking the inlet port .

    Weld a 1/4" thick piece of steel on the stops to prevent this if the center bolt (king bolt) in in good shape as this being loose or worn out will cause the same issue.

  4. pldann86

    pldann86 Member
    from LI NY
    Messages: 72

    Everything checks out even welded spacers on stops, still jams. crossover valve?
    Last edited: Feb 6, 2016