1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E58H won't go into float mode?

Discussion in 'Meyer / Diamond Products Discussion' started by brianbora1, Jan 26, 2013.

  1. brianbora1

    brianbora1 Member
    Messages: 68

    My controller is showing it in the float mode and the blade is barely hitting the ground. Chain is tight and I tried to manually push the ram down with plow connected and it will not move. It will lower all the way until it just touches the ground but no further. Any help would be greatly appreciated!
  2. brianbora1

    brianbora1 Member
    Messages: 68

    After further inspection, shaft at the bottom is bent! No idea how this would of happened, any input? And no I didn't hit anything hard! Thanks!
  3. jasonv

    jasonv PlowSite.com Addict
    from kannada
    Messages: 1,122

    It doesn't take a *hard* hit. Just a little hit.