1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E47 won't angle

Discussion in 'Meyer / Diamond Products Discussion' started by Moodyscruz, Jan 31, 2011.

  1. Moodyscruz

    Moodyscruz Junior Member
    Messages: 3

    I have an E47 that's kind of old, I replaced the A valve and coil last week because it wouldn't come down, Now it won't angle either way, I can hear the motor working and the draw on the battery shows that it's getting power, could the B or C valve go at the same time, and when I hit a snow pile it just pushes the blade from one side to the next, like there is no pressure holding the blade... Any help would be great, thanks
  2. 525Enterprises

    525Enterprises Senior Member
    Messages: 188

    if its not going to angle, and you can compress the plow from side to side when its in the raises postioin its the crossover valve. Spirng borke. Replace that and go plow...
  3. Moodyscruz

    Moodyscruz Junior Member
    Messages: 3

    Where is the cross over valve..?
  4. Bashby

    Bashby Senior Member
    Messages: 228

  5. Moodyscruz

    Moodyscruz Junior Member
    Messages: 3

    Thanks for the manual