1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E47 will not do anthing?

Discussion in 'Truck & Equipment Repair' started by ogill2783, Feb 5, 2011.

  1. ogill2783

    ogill2783 Junior Member
    Messages: 14

    Have no idea whats wrong. i have replaced everything all power and ground wires, motor, hydro pump,shaft, cap with all new seals, all the valves, and solenoid. have flushed it and replaced fluids and screens. when i hit the up i can hear the motor working but i get nothing no up down or left or right. i have spent way to much money and my wife is going to kill me if i cant figure this out and stop spend money!! any help would be great thanks
  2. RNR Services

    RNR Services Junior Member
    Messages: 19

    Check the connection were the controller plugs in. I had that prob. and turned out to be a bent prong and was not making contact. Good luck.
  3. ogill2783

    ogill2783 Junior Member
    Messages: 14

    will check thanks