1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E47 Leaking

Discussion in 'Commercial Snow Removal' started by jonw440, Nov 25, 2003.

  1. jonw440

    jonw440 Senior Member
    Messages: 139

    On the front of my E47 pump there is a hole. (See picture)
    Am I missing a plug? It constantly leaks fluid.

  2. SnowLane

    SnowLane Senior Member
    Messages: 127

    That is a weep hole for the pump. When fluid begins to leak out that hole it is time for a new pump shaft seal. Remove the motor from the pump and you will then see the seal.
  3. easthavenplower

    easthavenplower Senior Member
    Messages: 282

    are you sure thats not the adjustment screw for how fast you want the plow to drop thats were my screw is but theres a plug for mine i also have the other pump so they might be set up different
  4. Garagekeeper

    Garagekeeper Senior Member
    Messages: 459

    As Snowlane said check the seal.
    If your power unit is under two years old,
    you should be able to have it repaired under warranty.

    :rolleyes: John...................
  5. jonw440

    jonw440 Senior Member
    Messages: 139

    It is a "little" over two DECADES old! :nod:
    A little paint and decals does wonders!!
  6. Garagekeeper

    Garagekeeper Senior Member
    Messages: 459

    Excellent repaint work!
    I need to send you the ones I service for their repaint.
    :rolleyes: John............
  7. EJK2352

    EJK2352 Senior Member
    Messages: 193

    There is no drop speed adjustment on an E-47 lift, Meyers only offers the drop speed adjustment on their E-60 lift. It is a leaking pump seal for sure.