1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

e 47 stuck to the right

Discussion in 'Meyer / Diamond Products Discussion' started by windrowsnow, Dec 5, 2011.

  1. windrowsnow

    windrowsnow Senior Member
    from nw ohio
    Messages: 168

    we have an e47 that sticks to the right and wont angle left unless you hit a curb. i am guessing one of the valves is bad?
  2. wva

    wva Member
    Messages: 78

    time to replace your couplers most would say with the pin type
  3. kimber750

    kimber750 PlowSite Veteran
    Messages: 4,679

    also check for binding with a frame and sector.
  4. racer47

    racer47 Senior Member
    Messages: 381

    c valve swelled and sticking replace valve
  5. mpriester

    mpriester Senior Member
    Messages: 424

    mine did that exact same thing, it had a pair of ball couplers on that side , i changed them to pin type and problem cured.
  6. tjctransport

    tjctransport PlowSite.com Addict
    Messages: 1,390

    also check for a bent angle piston.