1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E-47 pump seal replacement-how?

Discussion in 'Meyer / Diamond Products Discussion' started by eriklane, Jan 10, 2011.

  1. eriklane

    eriklane Member
    Messages: 75

    How do I pull the old pump seal out?
  2. Nasty-Z

    Nasty-Z Senior Member
    Messages: 370

    I usually drive a small old flat screwdriver into the metal outer ring and lever it up and out of the housing

    Be sure to scotchbrite the pump shaft to remove as much of the wear ring as possible , use a slight amount of sealant on the outer ring of the new seal, a bit of fluid on the shaft , drive it in until flush with the housing and pray it seals.