1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Dual Burn on Intensifires?

Discussion in 'Fisher Engineering Discussion' started by 2COR517, Aug 14, 2009.

  1. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Any ever set up dual burn (Lo beam on with Hi beam) on the Fisher Intensifires?

    I would like to do it, but worried about the socket and/or housing not taking the heat.

    And what about the old school sealed beams?
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Never had an issue with either of them, been doing them all for years. Good upgrade and inexpensive too.
  3. 06Sierra

    06Sierra PlowSite.com Addict
    from Maine
    Messages: 1,329

    That's good to know. I just did the that, 4 HI, with fogs. The fog lights come on whenever the lows are on and stay when I turn high beam on. I was just wondering about this the other day. I'll take the diode out for the fogs though and keep the diode for the high/low beams since it won't be an issue with the plow lights.