1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Do they make a Fisher Minute Mount 2 Adapter for an Ultramount?

Discussion in 'Western Plows Discussion' started by bbackes, Nov 26, 2015.

  1. bbackes

    bbackes Junior Member
    Messages: 6

    Wondering if anyone has seen an adapater to run a Fisher Minute Mount 2 Plow from an Ultramount Setup? Got a really great deal on a very gently used 2 yr old Fisher XLS and I would like to use it but really dont want to change out mounts when all my trucks are Western Ultramounts. Anyone?
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 11,391

    No they don't.
  3. Tony350

    Tony350 Senior Member
    Messages: 546

    I am sure if you brought a fischer mount the xls and your truck with the ultramount to a good welder fabricator t g e could make a fischer setup to pin into the ultramount. I am sure it would cost a fair amount, 500 at least. being as it is a total custom thing, o b e of a kind.
  4. Snow Commandor

    Snow Commandor Senior Member
    from 07666
    Messages: 443

    Just buy the Fisher push plates for your truck. YOU can find them used for around $400 online
  5. 90plow

    90plow Senior Member
    Messages: 739

    Buy some old fisher mounts and have a welder make them fit in place of the western "shoes" that un pin from the truck. Should be pretty easy.
  6. bbackes

    bbackes Junior Member
    Messages: 6

    Thanks for all the suggestions. Found a newer Fisher MM2 mount and I had an extra set of Ultramount receivers that I took to a buddies fab shop and he is already working on putting them together. Should be a sweet setup once finished this week.
  7. mishnick

    mishnick 2000 Club Member
    Messages: 2,353

    I would buy a Western ultra to uni adapter, cut off the uni parts and weld on what you need for the Fisher....