1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Dang curtis connection....

Discussion in 'Truck & Equipment Repair' started by PremierLand, Dec 25, 2005.

  1. PremierLand

    PremierLand PlowSite.com Addict
    from detroit
    Messages: 1,572

    Is there anything I can do to fix the problem the curtis has with their old wiring location, under the bumper. I hate it, its always coming loose and has a bad connection.

    What are some tricks anyone with the same problem has done?

    I put di-electric grease in it when needed, and it helps a little, but not all the way?

    My bro is good with electroics and could do it if I figured out how.

    I dont want to spend the $300 to get it upgraded to how they are now at the curtis dealer.

    Thanks guys, its really ticking me off.

    By the way, Merry Christmas
  2. Mark Witcher

    Mark Witcher Senior Member
    Messages: 605

    Tie the two halves together with string or wire to hold them tight .
  3. DJ Contracting

    DJ Contracting PlowSite.com Addict
    Messages: 1,392

    Zip ties

    Mark use those plastic zip ties you can put two med length ones together or find a heavy truck store and buy the large ones there are inexpensive so you can cut them off each time you are done plowing.
  4. PLOWMAN45

    PLOWMAN45 2000 Club Member
    Messages: 2,951

    id bring to to snowplow place let them send the connections through the grill of the truck
  5. PremierLand

    PremierLand PlowSite.com Addict
    from detroit
    Messages: 1,572

    Thanks guys.

    Its $300. I was wondering if theres a way I can do it myself.