1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Cut new lens

Discussion in 'Strobe Lighting' started by mike13, Dec 10, 2010.

  1. mike13

    mike13 Member
    from mass
    Messages: 49

    Hi guys I just got my lens kit in from the guy I bought the light from off eBay
    And it looks like he only counted on one spacer. The question is
    What is the best way to cut 1/4" off all of them or is there around me
    To cut them for me
  2. NAHA

    NAHA Senior Member
    Messages: 162

    chop saw with a fine blade on it. cut it nice and slow

    THEGOLDPRO PlowSite Veteran
    Messages: 3,136

    i used a dremel to cut mine down with the little cut off wheel, i also cut one down with a hack saw one time, i dont recommend you try that lol
    Last edited: Dec 10, 2010
  4. Strobesnmore

    Strobesnmore Senior Member
    Messages: 413

    We use a band saw.
  5. Pirsch

    Pirsch Senior Member
    Messages: 596

    Small saw with very fine teeth. make sure you tape the area really well and cut through the tape. this will keep it from splintering the rest of the plastic. cut it really slow and not to much pressure.
  6. mike13

    mike13 Member
    from mass
    Messages: 49

    Thanks guys I'll be doing that this weekend then finally by Thursday have it wired an put on