1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Custom made some housings for whelen linear

Discussion in 'Strobe Lighting' started by TJS, Nov 11, 2015.

  1. TJS

    TJS PlowSite.com Addict
    Messages: 1,440

    had some old dash kings laying around. I needed some side strobes in the rear when backing out of certain areas. Found some aluminum tube and milled out the one side and I also modified the liner housing. I then welded blocks to each end. Those blocks will be drilled and tapped to hold the lens. I will also cover the screw area with some delrin so it locks it all in. These will be mounted on the rear underside of my flatbed dump bed. I will also make some protectors. Should be done in a week or so. I know I could have bought this or that but I wanted to see if it was do-able.




  2. Too Stroked

    Too Stroked Senior Member
    Messages: 573

    Nice looking fabrication work!
  3. jhall22guitar

    jhall22guitar PlowSite.com Addict
    Messages: 1,056

    Awesome idea. Looks great, and should get the job done.