1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

curtis angling problem

Discussion in 'Truck & Equipment Repair' started by cement, Oct 29, 2007.

  1. cement

    cement Junior Member
    Messages: 1

    I have a Curtis pro 3000 the plow angles very quick to the left but angling to the right its not as fast and can hear a strain on the pump all other functions OK ran it all last season like this but it is annoying seems to be a restriction but had cleaned all the valves out. pump pressure was the same on both angle lines. could there be a binding ram? or could something else be causing a restriction? there is no binding in the plow frame,
    Does any body have any ideas?:dizzy:
  2. JD Dave

    JD Dave PlowSite Fanatic
    Messages: 11,194

    I'm not familiar with that plow but can you switch the lines or the cylinders from side to side, to see if it still does the same thing. It will narrow down the possibilities.
  3. CNY Plow

    CNY Plow Senior Member
    Messages: 145

    have you checked your fluid levels?