1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Curb?..What Curb?

Discussion in 'Equipment, Tools & Vehicle Pictures' started by boltzrlandscape, Feb 13, 2010.

  1. boltzrlandscape

    boltzrlandscape Junior Member
    Messages: 7

    So I was driving through the local supermarket today with a friend and decided to go around back. This is what I found sitting next to the contractors equipment trailer. My guess is it happened the other day during New Jerseys large snow event, guess the operator forgot where there was curb.:nono:
    The one side is pretty badly bent and the other side was bent alittle. I guess you can just heat up the sides and bend them back to save money, but still its got to be a pain in the A$$.

  2. mike6256

    mike6256 Senior Member
    Messages: 286

    Oops!! thats not good...
  3. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    That will buff right out.
  4. bigbadbrad

    bigbadbrad Senior Member
    Messages: 836

    looks like the paint has already been burnt off from being heated and straightened before. was not the first time that has happened.
  5. Dstosh

    Dstosh Senior Member
    Messages: 534

    Bust out the torches and porta power
  6. Lil' Danny

    Lil' Danny Member
    Messages: 58

    That's gotta be in Pompton Lakes, behind the A&P.
  7. EaTmYtAiLpIpEs

    EaTmYtAiLpIpEs 2000 Club Member
    Messages: 2,607

    Oh give it a new coat of paint and buff it. It will be like new :p
  8. mossman381

    mossman381 2000 Club Member
    Messages: 2,410

    It looks like it was bent from the top. Like someone backed into it. If a curb did that the bottom would be bent.
  9. cretebaby

    cretebaby PlowSite Veteran
    Messages: 4,162

    That is the bottom.
  10. nms0219

    nms0219 Senior Member
    Messages: 445

    its upside down.
  11. mossman381

    mossman381 2000 Club Member
    Messages: 2,410

    :laughing: I see, it is upside down. The side that is not bent that bad looks like it won't touch the ground.
  12. Jay brown

    Jay brown PlowSite.com Addict
    Messages: 1,783

    shouldn't that model have skids on it? skids should prevent that from happening
  13. s&mll

    s&mll Senior Member
    from NJ
    Messages: 260

    Who drives around the back of stores?
  14. ahoron

    ahoron Senior Member
    from here
    Messages: 422

    Must have been on a toyota:laughing::laughing:
  15. plowbum

    plowbum Junior Member
    Messages: 9

    they should have invested in some markers *******!!
  16. Pennings Garden

    Pennings Garden Senior Member
    from VA
    Messages: 242

    I do that alot...
  17. Mr.Markus

    Mr.Markus PlowSite Fanatic
    Messages: 5,782

    Trolling for equipment or just dumpster diving?
  18. boltzrlandscape

    boltzrlandscape Junior Member
    Messages: 7

    It is a shortcut to get to my one friends house we take alot.
  19. Pennings Garden

    Pennings Garden Senior Member
    from VA
    Messages: 242

    Getting better educated on what my competition does / uses, on what they do right or wrong. educating myself in case I want to bid on that property in the future. If I see something wrong I might snap a couple of pictures to show my guys so they know what not to do if we ever do get a contract for that property.

    And to be honest, it wouldn't be the first time I see my competition driving around on one of our properties...
  20. Mick76

    Mick76 2000 Club Member
    from Maine
    Messages: 2,157

    If he were to have bought an arctic pusher from the start, he wouldn't have this problem right now!......LOL

    And I do admit, I have trolled on other sites that I bid on or are interested in.......