1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Cross Reference for Plow Mounts

Discussion in 'Residential Snow Removal' started by wsmm, May 8, 2010.

  1. wsmm

    wsmm Member
    Messages: 80

    Does anyone know of a site where you can cross reference what vehicles and years a plow frame will fit. For example I'm pulling a frame off of a 1979 Dodge Ramcharger and would like to know all the vehicles it would fit. Also I'm looking to put a plow on my 1990 Chevy 1/2 ton 4x4 truck and would like to know what year & vehicles I could tkae a plow frame off of that would fit on my Chevy.

  2. bigblock73

    bigblock73 Member
    Messages: 35

    I found the Meyers site to be the easiest to use
    It won't tell which vehicles it will interchange with but with spending some time,you can tell which trucks it will fit.
    I used them when I was looking for a plow for my truck.

    You put in the info for a specific truck and it will give you the parts breakdown for that vehicle then you try another vehicle and check the parts #'s for that truck.

    I was able to find the info to buy the correct plow setup for my truck.

    Hope this helps
  3. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,993

    88-2000 classic pick up All
    88-2000 classic Government Motor Company pick ups all

    There problem with using the web matching programs for older uh Classic vehicles are changing parts number and support. they supersede part numbers as models change a with the newer mount fitting all vehicles.

    Examples For your 1990 Chevy you should not use a true 88 western conventional mount, though you can use the mount off a 89 on an 88. The new mount was modified to deal with a power steering cooler line.

    Ford super duty mounts have changed a number of times over the last decade.

    Manufacturers will also remove mounts and fits no longer supported by the factory from the matching programs

    You can use the sites to match up but sometimes you have to go to the actual application guides and do a little cross referencing.

    Give a holler If you're unsure before you pull the trigger. One of us might know something the programs don't offer. But yours is straight forward you can use any Government Motors pick up mount from 89-2000 classic, just avoid mounts off of 89s.