1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

could someone measure....

Discussion in 'Commercial Snow Removal' started by mcwlandscaping, Nov 28, 2007.

  1. mcwlandscaping

    mcwlandscaping 2000 Club Member
    Messages: 2,557

    The approx diameter of the fisher logo on their plow? About to where the spat marks start to thin out and get more distant from each other. I have an idea for my plow but need that measurement! Also, can you measue how far down from the top and how far from the left side it starts? I'll post pics of what i'm doing when i get these and can do my thing!! :) :nod::jester::drinkup:
  2. streetsurfin'

    streetsurfin' Senior Member
    Messages: 770

    It'll cost you 1 splatt sticker

    The center of the crossbar of the H is 13 1/2 " over from the left (facing plow from front) side of plow, and 11 1/2" down from top (with measuring tape pressed against curve of moldboard) . The Main part of the emblem, measured L to R across the word Fisher, at the outside of the main splat is 9" wide. (7'6"RD)
    Last edited: Nov 28, 2007