1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

converting older plow to new mount

Discussion in 'Commercial Snow Removal' started by davidrbean, Dec 18, 2003.

  1. davidrbean

    davidrbean Member
    Messages: 49

    I am new to this. I just bought an older meyer plow that the lift mech. and lights stay on the truch. what parts would I need to get so that I can remove these when not using the plow.
  2. JMR

    JMR Senior Member
    Messages: 567

    I have made this conversion. You need all the mounts. Your current lights, pump, wiring etc. will work with the new set-up. The blade should line up no problem. I should add that the upper hoop is very difficult to remove. You can't put enough grease on it before you install it. I don't think you are going to want to remove it between snows, probably only once the plowing season ends.