Control module

Discussion in 'Fisher Engineering Discussion' started by sven1277, Nov 10, 2019.

  1. sven1277

    sven1277 Senior Member
    Messages: 554

    Looking at purchasing a 2015 ram with a mm2 straight blade. This truck will replace an ‘02 Silverado with an xv2. Two questions. First, can I use the xv2 on the ram if I switch the handheld controllers or can I simply switch the cpu from the Silverado with the ram to allow use of the xv2? I guess the more basic question is do all fisher plows use the same cpu?
    Thanks
     
  2. JFon101231

    JFon101231 Senior Member
    from CT
    Messages: 693

    There is no "CPU". There is a isolation module on the truck for 3 plug and 2 plug fleetflex systems. On 2 plug fleetflex plows, there is also another module on the plow which converts the pulsed signal from the controller to individual solenoid power.

    We need some more info. Is the mm2 straight blade on the Ram a 3 plug straight or 2 plug? The issue at hand is not the modules it's what battery and control wiring you have. I'm local to you
     
  3. OP
    OP
    sven1277

    sven1277 Senior Member
    Messages: 554

    I haven’t seen the truck in person but let’s assume it’s a two plug like the rest of my plows with the four pin control plug
     
  4. cwren2472

    cwren2472 PlowSite Fanatic
    Messages: 6,910

    Then itll work
     
  5. OP
    OP
    sven1277

    sven1277 Senior Member
    Messages: 554

    Awesome. Thanks