1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice


Discussion in 'Boss Plows Discussion' started by 48archer, Feb 4, 2011.

  1. 48archer

    48archer Junior Member
    from Ohio
    Messages: 14

    Im running a 8' 2" V on concrete parking lots and this stuff is wearing out cutting edges like crazy, what are you guys doing to slow the wear process down some? Im also not using shoes and wondering if i should be. Also has anyone tried using rubber cutting edges and having any luck with them?
  2. steve_robert

    steve_robert Junior Member
    Messages: 19

    put the shoes on. it will help
  3. GA73

    GA73 Member
    Messages: 90

    the rubber edges will not clean good on hard surfaces.
  4. hydro_37

    hydro_37 PlowSite Veteran
    from iowa
    Messages: 3,790

    if your not running the new style edges you may want to try them out
    very little wear on mine after 100 plus hours of plowing
  5. Jewell1386

    Jewell1386 Senior Member
    Messages: 139

    depends on the edges also if you bout from like central parts or the buyers edges they will wear faster and also run shoes I got new boss edges and we do a lot of scraping down and they still go fast without shoes
  6. 48archer

    48archer Junior Member
    from Ohio
    Messages: 14

    The last two sets i had were the new style without the curb guards. Yesterday i put a new set on with the curb guards and this time im going to put the shoes on and see what happens, hope this works this set of edges cost me $405. Thanks everyone for the feedback.