1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Complete Meyer Setup

Discussion in 'Used Plowing and Truck Equipment Forum' started by MattsMowingOH4, Aug 17, 2011.

Thread Status:
Not open for further replies.
  1. MattsMowingOH4

    MattsMowingOH4 Member
    Messages: 67

    Up for sale is a 7'6'' Meyer EZ mount classic snow plow with a e-57 power unit. The unit also has the Meyer wings installed making the over all width just under 10ft. I had the unit sand blasted and painted in 2009, and the power unit was rebuilt then to. Everything included to hook up to a 99-02 chevy 1500.Lower bumper valance included to help keep a clean summer look. Unit washed after every use and stored inside when not in use.
    $2800 obo

    New parts in 2009
    3 trip spring
    truck mount
    saber 2 headlights
    daytime running light module
    pivot pins with grease zerks
    headlight adapters
    plow guides
    hoses and quick disconnects truck side and plow side
    every single nut and bolt on the blade

    New in 2010:
    Cutting edge(about 70% left)
    Meyer Plow Wings(70% rubber left)
    New head light modules(replace a fuse instead of whole part save a $100!)
    Meyer handheld controller

    Also included with sale:
    3 quarts of meyer fluid
    2 spare hoses
    3 trip spring
    old A-frame( if you can weld its fixable)
    old meyer handheld controller
    2 plow guides
    plow shoes
    spare lift arm
    new buyers "timbren"
    custom brackets to keep unit as one during summer months


  2. MattsMowingOH4

    MattsMowingOH4 Member
    Messages: 67

    bump bump bump
  3. MickiRig1

    MickiRig1 PlowSite Veteran
    Messages: 3,617

    You got to be kidding me . I am in North Hill Akron. Been looking for this. Still got?
  4. MattsMowingOH4

    MattsMowingOH4 Member
    Messages: 67

    I am going to try and sell tis again... Had the pivots replaced with meyer oem grease-able pivots, installed a meyer snow deflector, new meyer hoses. This was all installed by Cenweld in the fall. I also purchased a Meyer E-60 last fall that was completely worked over with everything replaced!
    I am asking $3000
  5. MattsMowingOH4

    MattsMowingOH4 Member
    Messages: 67

  6. MattsMowingOH4

    MattsMowingOH4 Member
    Messages: 67

Thread Status:
Not open for further replies.