1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

center pin broke right side of blade touches ground

Discussion in 'Boss Plows Discussion' started by 2low, Dec 18, 2012.

  1. 2low

    2low Member
    Messages: 56

    hello all the center pin broke on our blade last year ( horizontal pin) i installed a new pin and the right blade still sits lower to the ground what would cause this?. also the pin i installed seams to short dealer said there only one pin for all v blades
  2. Spool it up

    Spool it up Senior Member
    Messages: 912

    one wing is most likely bent . had a simular situation a few years back from an unforseen raised inlet . the right wing hung lower than the left and was off centered in vee position .
  3. framer1901

    framer1901 Senior Member
    Messages: 852

    The A Frame itself could also be bent. You just don't break a center pin.

    Pull everything off the lower A Frame and set it on level ground and see if it sets flat.

    I've had welded washers come off the center pin and the pin work it's way out but I have never seen one broken.