1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Can I use a 2004-05 wiring harness on a 2008 F350?

Discussion in 'Fisher Engineering Discussion' started by Troop2814, Sep 3, 2012.

  1. Troop2814

    Troop2814 Junior Member
    Messages: 2

    I have a 2001 Ford F250 that in 2004 or 2005 I bought a MM2 Stainless X-Blade plow with a 3-plug setup.

    I just purchased a 2008 F350 and wondering if I can use the same wiring harness for the new truck??

    The isolation module (4 plugs) does not have any part number, but a couple of the cables leading away have part numbers: 26349 and 26354.

    Thanks in advance!!
  2. RLM

    RLM PlowSite.com Addict
    Messages: 1,270

    Look it up on fishers website I believe they break the mount down & wiring harness separately see if the part numbers are the same.
  3. abbe

    abbe Senior Member
    from RI
    Messages: 718

    I believe you need a 3 port isolation setup.
  4. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,525

    I think it 08 diesel may require the 3 port blue soft start module, Im not 100% sure on gas.
    Last edited: Sep 3, 2012
  5. nealybird

    nealybird Senior Member
    Messages: 750

    yea, the lights are different. those harnesses you have are for the HB1-HB5 lights, and the 2008 would have H13, or 2B. and Brad is right, 2008 Fords were the ones that Western had to come up with the soft start module (29760-1), and is still what they recommend using. gas or diesel doesn't make a difference.
  6. nealybird

    nealybird Senior Member
    Messages: 750

    .. sorry, I should have said Fisher. forgot which section I was in. or Western AND Fisher. lol