1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Can find the answer to this

Discussion in 'Eureka Fluid Film' started by vincent, Dec 5, 2008.

  1. vincent

    vincent Senior Member
    Messages: 171

    Can FF be used on a poly blade? What about my new 2450 snow blower.

    What is not safe to use on?
  2. Dano50

    Dano50 PlowSite.com Addict
    from CA
    Messages: 1,270

    Sorry about the delay in responding. I've been on the tradeshow circuit. Fluid Film will help keep snow from clogging snow blower chutes and snow from sticking to plow blades.

    It is safe to use on paint, plastic and rubber and will not burn greenery on cutting devices.
  3. 06HD BOSS

    06HD BOSS 2000 Club Member
    Messages: 2,611

    Preach it Dano!!
  4. grandview

    grandview PlowSite Fanatic
    Messages: 14,609

    How did I miss this post?:realmad:
  5. ghlkal

    ghlkal Member
    Messages: 83

    How much FF would be needed to coat a 7.5' poly moldboard?
  6. jkiser96

    jkiser96 Senior Member
    Messages: 401

    I sprayed a full can on my 8'2" Boss V, but I also sprayed very heavy & made sure evry joint & seam was treated good.
  7. ghlkal

    ghlkal Member
    Messages: 83

    Thanks ... I'll try a can and see how it works out.