Bottom of plow

Discussion in 'ATV / UTV Snow Removal' started by Go Cubs Go, Nov 10, 2019.

  1. Go Cubs Go

    Go Cubs Go Junior Member
    from Montana
    Messages: 1

    I have a plow on my ATV, and only use it for private use, not for a job. It does a great job (it’s with a winch by the way), but on the second season of use, it started dragging on the tubes on the underside behind the blade. Can anyone help with how to get it to stop doing that? Thanks!
  2. Mr.Markus

    Mr.Markus PlowSite Fanatic
    Messages: 11,362

    Is it bent or worn down? Pictures would be helpful.
    m_ice, theplowmeister and dieselss like this.
  3. m_ice

    m_ice 2000 Club Member
    Messages: 2,140

    If the cutting edge is wore down find an old truck cutting edge and just weld it to the atv cutting edge
  4. sublime68charge

    sublime68charge Addict
    Messages: 1,172

    what brand of plow due you have?
    ATV as well
    My Dad had a Cycle country and after 6 seasons of plowing with a Kawasaki 400 the push tubes had bent down and was dragging on the ground as well. Bent them back straight and welded some angle iron along the length of the tubes and its been fine since.

    pics would be a help