1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Boss Single Post Motor Stripped out Ground

Discussion in 'Boss Plows Discussion' started by diggerbauman, Feb 6, 2012.

  1. diggerbauman

    diggerbauman Junior Member
    Messages: 6

    I managed to strip out the ground self tapping bolt on my single post motor. Any suggestions to a fix?

    RBRONKEMA GHTFD 2000 Club Member
    Messages: 2,592

    Your gound goes the the manifold block between the hydro tank and motor correct? If so, and it was mine, I would just re tap it to the next size up. And remember tight is tight. Don't be afraid to use a little lock tight also on the bolt either.
  3. diggerbauman

    diggerbauman Junior Member
    Messages: 6

    We'll give it a whirl! Thanks!!