1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Boss RT3 wont raise from the smartswitch

Discussion in 'Boss Plows Discussion' started by snowbelt5, Sep 25, 2011.

  1. snowbelt5

    snowbelt5 Member
    Messages: 51

    when i flip the switch up on the smartswitch it will not raise.. It makes like a stuggleing sound like the pump is empty on fluid or something.. I just switched all the wiring over from my other truck so i dont know if i have something hooked up wrong or not. the wings works like they should and the down button works fine but the plow wont raise.
  2. grandview

    grandview PlowSite Fanatic
    Messages: 14,609

    Are the pins all the way through the under carriage?
  3. milwaukeevtwin

    milwaukeevtwin Senior Member
    Messages: 335


    Did you hold down on the remote button? Sounds dumb but drivers have forgot this before.
  4. bigrichslc

    bigrichslc Junior Member
    Messages: 18

    could be either a bad switch or the diode wire has gone bad. Or check to make sure all the wires are still on the valve body. Got a Test Light?