1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Boss frame mount issues on Dodge 3/4 ton

Discussion in 'Truck & Equipment Repair' started by nbuzz, Nov 18, 2012.

  1. nbuzz

    nbuzz Junior Member
    Messages: 24

    Hi Guys, I'm having a hard time getting the truck undercarriage to align properly to all the blot holes.

    Its an RT3 mount going on my 97 Dodge 3/4 ton.

    here's the deal I bought new grade 8.8 metric 14mm (just a hair bigger than the original 1/2'') bolts to tighten up the slop on the pushbeam bolts, since its been awhile since worked on it.

    So I re-aligned the bumper and mount installed the new bolts and now the rear support arms won't line up to the pushbeam. I'm level and at the correct pin height of 15.5''. I don't know what to do to correct this. the only modification to the truck is 265/70 tires instead of the factory 245/16's.

    Any help would be great! thanks guys