1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

bolt size for deflector

Discussion in 'Boss Plows Discussion' started by phen440, Nov 13, 2010.

  1. phen440

    phen440 Junior Member
    Messages: 14

    don't have access to the plow right now. Looking to see if anyone knows the bolt size for the deflectors. its for a 9ft superduty plow

    RBRONKEMA GHTFD 2000 Club Member
    Messages: 2,592

    Usually they are 7/16''. Not sure on length.
  3. bossplowguy

    bossplowguy Senior Member
    Messages: 214

    I used 1/4x1" stainless on mine....
  4. Kodiakguy

    Kodiakguy Senior Member
    Messages: 106

    We use 3/8 by 1 inch grade 5's on ours. Drilled and taped the plow, no need for nuts. Also use anti sieze. It protects from rust and ensures easy removal if necessary. I know grade 5 seems like over kill, but we like keeping things strong.

    Stainless is not a bad idea, however it causes galvanic corrosion