1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Blowing Fuses

Discussion in 'Jeeps' started by grober02, Dec 27, 2012.

  1. grober02

    grober02 Junior Member
    Messages: 1

    I have a ’95 YJ Wrangler with a Meyers plow and slik stik. Power for the slik stik was spliced into the cigarette lighter. It’s been connected and functioning fine this way for 3 years. Lately it’s been blowing either the 20 amp fuse in the slik stik wire connector or the 20 amp fuse in the Jeeps fuse panel under the drivers side dash. I am able to operate the plow after replacing the fuse, but it will eventually blow another fuse in a week or so. I’m not quite sure what’s causing this. Is this a ground issue?
  2. theplowmeister

    theplowmeister 2000 Club Member
    from MA
    Messages: 2,617

    Ya a wire is going to ground that shouldn't (a Short) on the plow wireing