Blizzard-Western swap

Discussion in 'Blizzard Plows Discussion' started by LapeerLandscape, Jan 12, 2015.

  1. LapeerLandscape

    LapeerLandscape PlowSite Fanatic
    Messages: 7,428

    Is there any reason why I cant put my Blizzard power plow on my Western MVP ultra mount? The truck side mounts are the same part number, they are both 3 port, 2 plug systems.
     
  2. bliz&hinikerDLR

    bliz&hinikerDLR Senior Member
    Messages: 661

    No. There is no reason not to.
     
  3. OP
    OP
    LapeerLandscape

    LapeerLandscape PlowSite Fanatic
    Messages: 7,428

    That's what I thought, I just might have to trim some more plastic for the Blizzard mount adapter.
     
  4. bcvickers

    bcvickers Junior Member
    Messages: 2

    Dredging up an old thread here...Which model of Blizzard power plow hooks up to the Ultra mount, if this worked out for you?
     
  5. dieselss

    dieselss PlowSite Fanatic
    Messages: 13,305

    The new blizzards. Ph2
     
    bcvickers likes this.
  6. fireside

    fireside PlowSite.com Addict
    Messages: 1,478

    Blizzard ph1 and twos both fit!! Just need to weld up plates to push beam. I have two trucks new mounts running ph1 plows
     
  7. Cooter24

    Cooter24 Senior Member
    from NE Iowa
    Messages: 285


    So the advantage is using your older equipment and wiring without having to scour for an older or used PH1 mount? Interesting. I just picked up another truck w an ultra mount on it. I have push beams and wiring for our PH1 plows.
     
  8. fireside

    fireside PlowSite.com Addict
    Messages: 1,478

    Running them on 2012 and 2015 chevys.
     
  9. fireside

    fireside PlowSite.com Addict
    Messages: 1,478

  10. fireside

    fireside PlowSite.com Addict
    Messages: 1,478

    It just slides into the new frame. I run both sets of wiring on one truck so we can use the spare plow as needed
     
  11. OP
    OP
    LapeerLandscape

    LapeerLandscape PlowSite Fanatic
    Messages: 7,428

    Did you make that.
     
  12. fireside

    fireside PlowSite.com Addict
    Messages: 1,478

    Yes I took old push beams cut them down and made the new end plates
     
    LapeerLandscape likes this.
  13. dieselss

    dieselss PlowSite Fanatic
    Messages: 13,305

    Looks nice...good idea