1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Blizzard Soloniod Issue

Discussion in 'Blizzard Plows Discussion' started by G.Landscape, Nov 16, 2011.

  1. G.Landscape

    G.Landscape Senior Member
    from Ontario
    Messages: 851

    So we are having issues with our 810ss not angling property and I think we have it narrowed down to the 'Pressure Compensation Regulation Valve' (Part 27 in the pic) it was leaking oil out the bottom.

    Took off the cap and the o-ring was shot, so got a new one but now I can't get the plug to seat back properly and it will not seal. Also wing and angling is very slow so I am not sure if this would also be linked to the S5 Solonoid (Part 25). Have the manual but it not a whole lot of help about how things work, just where they go

    I have a picture of how it should be seated as well from before it was apart.
    Any tips or experience with these would be great.

    Valve Pic.jpg

    Skid 1.JPG