1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Blizzard Draw arm and latch working backwards?

Discussion in 'Blizzard Plows Discussion' started by kmamark2000, Nov 6, 2013.

  1. kmamark2000

    kmamark2000 Senior Member
    Messages: 101

    the draw arm seems to be working backwards. When hooking up to my truck, the latch part moves before the arm. Is this normal? I thought the arm would raise first then the draw latch would then close. The reason I am asking, is because it wont latch onto the mount.
  2. Sharpcut 1

    Sharpcut 1 Senior Member
    Messages: 386

    Big bolt at hook end needs to be tightened up, should not curl up till arm hits bottom of mount on truck
  3. kmamark2000

    kmamark2000 Senior Member
    Messages: 101

    thanks, I'll check it out and let you know if it worked.
  4. dieselss

    dieselss PlowSite Fanatic
    Messages: 11,395

    Since your there. Might just as well replace it