1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

blizzard 810 problem need help quick please

Discussion in 'Blizzard Plows Discussion' started by james1115, Jun 17, 2006.

  1. james1115

    james1115 Member
    from CT
    Messages: 81

    Hey guys I have'nt touched my plow since last snow at end of march, so I hooked it up to move it today and I moved the arm onto the frame and moved the plow, when I went to lower the arm the relay blew I guess under the hood and now it is stuck on my truck. How do I fix this? I dont even need it fixed right now I just need it off. please help.
  2. pbeering

    pbeering Senior Member
    Messages: 266

    Have you checked to be sure it is fully plugged in? (Be sure to clean the plug ends and lube with some dielectric grease)

    Did you check the fuses under the dash?

    Have you inspected all the power and ground connctions to be sure they are tight?

    Is the switch on the controller in the correct position?

    Do these first before fiddling with the relays.