1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Bent center bracket

Discussion in 'Boss Plows Discussion' started by fathead, Dec 30, 2009.

  1. fathead

    fathead Junior Member
    from MN
    Messages: 13

    One, are all rvt3 center bracket the same

    Two, would you heat it up and bend back or replace

    Three, keep plow and worry about in the spring

    It work fine, I have to give a shove some time to lock in but other then that it fine

    Thanks Matt

  2. grandview

    grandview PlowSite Fanatic
    Messages: 14,609

    Don't touch it.
  3. Gumpy52

    Gumpy52 Member
    Messages: 70

    The brackets are different lenghts dependng on frame widths of different trucks. If you bent an ear you can hammer it back into position, if you bent the center bar back, order a new one, and replace it when you got time. As long as the plow locks into place you are OK for now.

    RBRONKEMA GHTFD 2000 Club Member
    Messages: 2,592

    Don't heat it. It will weaken it. Is one of the hooks bent of the actual cross bar that the hook are welded to bent?
  5. fathead

    fathead Junior Member
    from MN
    Messages: 13

    Ok thanks and it the hook that is bent on the right side. The plow driver thinks he can push anything. Need to stop hireing my self to push!!

    Thank again for the input
  6. stroker79

    stroker79 2000 Club Member
    Messages: 2,802

    LOL Thats funny