1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Back Drag?

Discussion in 'Commercial Snow Removal' started by Mysticlandscape, Jan 26, 2006.

  1. Mysticlandscape

    Mysticlandscape Senior Member
    Messages: 689

    I am going to put a new cutting edging on my 8ft fisher, i am going to make a back drag out of my old one. Does anyone have a back drag on their truck i could use as a model if so please post a picture thanks - Tim
  2. murphyslaw

    murphyslaw Senior Member
    Messages: 443

    Last edited: Jan 26, 2006
  3. Mysticlandscape

    Mysticlandscape Senior Member
    Messages: 689

    Whats happens what your push forward?
  4. murphyslaw

    murphyslaw Senior Member
    Messages: 443

    it just swing to the back and has no affect. but if backing up while you drop the blade it will stand on the back blade.
  5. BDB

    BDB Senior Member
    Messages: 124

  6. Mysticlandscape

    Mysticlandscape Senior Member
    Messages: 689

    Thanks, the picture have been helpful but i think im going to wait off a bit cause it looks like the strom is going to miss us so there is no need in making one if im not going to use it ...:(
  7. sodking

    sodking Member
    Messages: 45

    But now is the time to make it..when it is not in use...I'll be at New England Grows all week but the employees willl be plowing and then this weeked I'm on vacation (skiing...go figure)
  8. justme-

    justme- 2000 Club Member
    Messages: 2,138

    When would you think the best time to make one is... in a mild week before the snow, or in the middle of a blizzard when you should be sleeping before plowing or out plowing your route?
    Make it now so you have it when the white starts to fall.

    I like those designs, but you both have full trip blades. the back drags I have seen for Fisher's have been more like the edge is dragging behind and cannot fold under like those, but drags behind the blade.

    So, has anyone done one of these for a Fisher?
  9. steelcity

    steelcity Junior Member
    Messages: 11

    back drag attachment to a western V

    i am wondering about how to attach these things to my western V. it seems that a straight blade would be better for this but if there are any ideas on how to do this with a V blade i would really love to see your setup. i do alot of resi's so this would help me out alot.
  10. AJ Watson

    AJ Watson Member
    Messages: 50

    Back Edge

    I would like to see some more pictures from more people. Maybe some back edges on a 7-6 Western pro plow.
  11. Daner

    Daner PlowSite.com Addict
    Messages: 1,187


    For you mpv plow you have to cut the old edge in half fab the hinges that just hook the snow in the backup mode...If you were close by i could make one up for you :)