1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

B&B Need insight on E-57

Discussion in 'Meyer / Diamond Products Discussion' started by emeraldgreen, Feb 14, 2010.

  1. emeraldgreen

    emeraldgreen Member
    Messages: 64

    I have an E-57 that I transfered from a truck with EZ touch to a truck with toggles. It was operating fine on other truck, but now seems to angle slowly, and does not hold an angle against pressure. Is this related to the toggles, or could I have developed a problem since transfering?
    Could really use your input.
    Thanks for your help!
  2. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,993

    Pump issue not the controls.
  3. IApushn

    IApushn Junior Member
    Messages: 25

    Check your ground connections and make sure it is grounded straight to the battery.
  4. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Basher has you covered Bob, it's an issue with the pump not the toggles. Perhaps a bad O-ring on the C valve or a cross over valve issue (O-ring or damaged valve).