1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Axle seals

Discussion in 'Chevy Trucks' started by Newdude, Jun 3, 2010.

  1. Newdude

    Newdude Senior Member
    Messages: 889

    Well, during my last oil change, I discovered my driver's side axle seal (where the inside of the CV attaches to the diff output I believe?) is damp/seeping.

    How hard are they to change? I heard that the driver side is easier than the passenger side...any truth to that? Is it just loosen the bolts, and move it out of the way?

    It seemed easy on GM Service Information, but I could be wrong.
  2. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    I'm pretty sure the drivers side is the most difficult. Never done one, but someone with more experience will chime in. There's a thread or two here I think that details the procedure. You might be able to find it if you search.