1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Avalanche Prewired Switch...

Discussion in 'Strobe Lighting' started by Nabattery, Jan 16, 2011.

  1. Nabattery

    Nabattery Junior Member
    Messages: 6

    I understand that this topic has been covered in detail, however i plow with an avalanche 2550, and have that pre installed switch... i want to cut a ciggerette lighter extension cable, so i can plug in my whelen light, and operate it off of this switch. Please help.

    Thank you.

    RBRONKEMA GHTFD 2000 Club Member
    Messages: 2,592

    That wire should be taped to the roof. Take the 3rd break light out and use a flash light and see if you can see it. It will be on the drivers side. My truck doesn't have it, but I would think there is a power and ground up there. Once you get them pulled out, go and get a water proof 2 pin quick disconnecto and hook one end to the truck and the other to the light bar.