1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

auxillary switches

Discussion in 'Ford Trucks' started by karol, Jul 31, 2007.

  1. karol

    karol Senior Member
    Messages: 128

    I've got a back rack and I'd like to put some strobe lights on the rack. what's the best way to run the wire to the switches.
    Last edited: Jul 31, 2007
  2. bribrius

    bribrius PlowSite.com Addict
    Messages: 1,609

    okay. get your self a tap and die set, a chisel and a small ballpeen hammer. use the chisel and hammer to slowly chisel out each auxilary switch. the flat side of the ball peen works better for hitting the chisel. when the auxilary switches have cracked and fallen out you should have semi round holes. if not use the ball side of the ball peen hammer placed up to the whole and trace around it creating a circle with a permanent marker. gently sand the edges with sand paper (or a small grinding pad you attach to a drill might work) until the circle cut out is completley round. next its time for the tap and die...........

    just kidding