1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Anyone have issues with new or nearly new Slik-Stick controllers

Discussion in 'Meyer / Diamond Products Discussion' started by snowdays, Feb 16, 2014.

  1. snowdays

    snowdays Senior Member
    from Ohio
    Messages: 119

    Several friends have had issues with controllers being as new as 3 months old. The common problem seems that the plow wants to go left instead of raising if you push the toggle up. If you have slight pressure to the right as you go up, it will always go up. Then to top it all off, Meyer seems to not have any in production. they have been backordered for the last couple of months.
  2. sharpcut

    sharpcut Junior Member
    Messages: 2

    contacts inside switch are aluminum & get burned , disassemble switch (very easy) clean contacts & apply dielectric grease to contacts , i had same problem no power to solenoid for up ?? red wire i think , anyway was slick stik , after applying grease to contacts all fixed , used it last three snows no problem
  3. leolkfrm

    leolkfrm PlowSite.com Addict
    Messages: 1,980

    switch works but the nut to hold it in the bracket loosens up....hate to use a lock tite on it