1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Another noisy pump/ motor

Discussion in 'Fisher Engineering Discussion' started by d2_, Mar 22, 2014.

  1. d2_

    d2_ Junior Member
    Messages: 2

    I've replaced motor on insta act and noticed a little play in the valve body bushing that receives the motor shaft. All the functions work but it's noisy, runs slowly and soon stops
    Working altogether. Is the play enough to cause the motor to work so hard to stop? The motor is a little warm. The power cables are not hot.
    I've taken the reservoir and pump out cleaned the filter and pickup. Checked the valve gears. Replaced two o rings 1 on the plastic pickup and the other on the pump output. Did it miss something causing the motor to work to hard so it stops working?
    Way more than knee deep now! any help would be appreciated
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 11,395

    First start with you connections. Ck them all. Clean and inspect
    Then I would look into a psi test.