1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice


Discussion in 'Commercial Snow Removal' started by JElmWin, Jan 29, 2004.

  1. JElmWin

    JElmWin Senior Member
    Messages: 232

    My '94 1500 w/ Meyer's 7.5' used to overheat with plow straight. I would either angle or leave plow low. My '03 2500 doesn't. But I now have a fisher 8'. I travel with driver's side angled in and high enough not to bottom out. I also always angle plow for low speed on village main streets. Of course I also carry a ton and 1/2 ballast.
  2. cja1987

    cja1987 PlowSite.com Addict
    Messages: 1,407

    what ever works for you and your truck. i personally keep it straight.
  3. JElmWin

    JElmWin Senior Member
    Messages: 232

    Wrong thread!

    Sorry gang. The above post belongs in:

    PlowSite.com > Snow Plowing > Snow Plowing Discussion > Good reason to NOT travel with it angled!

  4. The Boss

    The Boss 2000 Club Member
    Messages: 2,099

  5. PLOWMAN45

    PLOWMAN45 2000 Club Member
    Messages: 2,951

    i angle it to the right to get airflow in the radiator