1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Allowable sag when plow lifted?

Discussion in 'Commercial Snow Removal' started by thinairflyer, Oct 17, 2005.

  1. thinairflyer

    thinairflyer Junior Member
    Messages: 28

    Just mounted an old Western plow on my '99 K1500 Suburban. When I lift the plow, measuring from the centerline of the rear wheel to the fender opening after bouncing the truck, that measurement increases 1/4".

    Same measurement at front wheel decreases 7/8"

    At front bumper, bumper goes down 1 1/4"

    Is this sag acceptable? (no ballast in rear at this time) Thanks
  2. scholzee

    scholzee Senior Member
    Messages: 243

    I always like to measure center of wheel to fender lip. I believe around 1 " is perfectly acceptable, you are well within that and with some balast in the back you will be all set.