Aftermarket Bumper with Plow...

Discussion in 'Ford Trucks' started by ToMang07, Aug 28, 2020.

  1. ToMang07

    ToMang07 Junior Member
    from Maine
    Messages: 20

    IT CAN BE DONE!

    Just thought I'd share.

    20200822_093743.jpg

    20200822_093758.jpg

    1.jpg

    2.jpg

    3.jpg

    4.jpg
     
    cwren2472 likes this.
  2. fireball

    fireball PlowSite.com Veteran
    Messages: 603

    Thanks
     
  3. 16hdsport

    16hdsport Senior Member
    Messages: 140

    Looks good !
     
  4. BUFF

    BUFF PlowSite Fanatic
    from FR NoCo
    Messages: 25,857

    Seems a little tight and any flex in the head gear will tag the bumper

    upload_2020-9-16_7-56-49.png
     
  5. OP
    OP
    ToMang07

    ToMang07 Junior Member
    from Maine
    Messages: 20

    No more/less than stock
     
  6. BUFF

    BUFF PlowSite Fanatic
    from FR NoCo
    Messages: 25,857

    Ok... then that should work... looks good BTWThumbs Up
     
  7. cwren2472

    cwren2472 PlowSite Fanatic
    Messages: 9,377

    Did you have to modify anything to make it fit or did the AM bumper simply fit the way the factory one did?

    Edit: it looks like you modified the bumper bracket to go around the plow mount?
     
  8. OP
    OP
    ToMang07

    ToMang07 Junior Member
    from Maine
    Messages: 20

    Correct. Notched the bracket to fit around the plow mount. Easy peasey. Cut, grind/smooth, prime/paint. Paint was the longest part.
     
  9. NYH1

    NYH1 2000 Club Member
    Messages: 2,536

    Looks good!

    NYH1.