1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Advice on installing boss plow

Discussion in 'Ford Trucks' started by BCF250SD, Nov 23, 2011.

  1. BCF250SD

    BCF250SD Junior Member
    Messages: 13

    Hey guys, I'm new to this site and like it very much. I have a 2006 f250 that I'm putting a boss 8' straight blade on this weekend and was looking for some advice on where to mount the relays and selonoid. If anyone has some pictures or advice on where is the best spot I would really appreciate it.
    Thanks Bryan
  2. dieseltech

    dieseltech Senior Member
    Messages: 273

    Altho i dont have a boss i mounted my iso module and pump relay on the passenger side near the rear compartment to the side. Found there was more room yet your headlight wires will probably need to be extended to compensate for putting them on the pass side. I also have an 06 f250 and mine is a diesel. Not sure what yours is