1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Adding LED lights to snoway plow

Discussion in 'Commercial Snow Removal' started by gasjr4wd, Feb 13, 2014.

  1. gasjr4wd

    gasjr4wd Senior Member
    Messages: 287

    I've got two LED lights that would be perfect to mount on the yellow "snoway" shield. The Aux button seems perfect for this.
    My only question(s) is has anyone else done this wired into the plow?
    The remote has a aux button and according to the manual:
    Auxiliary Functions
    This button (Figure 1-9, J) is used to control an external
    relay (installed by end user). This relay could control a
    multitude of items, ranging from beacon lights to
    additional plow lamps. This output is fused at 3 amps.

    OK, so I have to use a relay. Best location for this?
    What did you tap into for the 12V for the actual lights? Did you run another plug from battery to relay to lights?
    Any ideas? Comments? Any picts of your setup?
  2. gasjr4wd

    gasjr4wd Senior Member
    Messages: 287

    Can anyone tell me what the wire color?
    I'm assuming it's not the empty 3 connection plug, or is it?
    No one has done this?
    Have lights mounted, just need hot wire...
    OR, is it under hood???
  3. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,993

    BIG drum roll..............there is no wire.

    The Aux button does not function