Adding fluid to pump

Discussion in 'Commercial Snow Removal' started by dfor, Mar 3, 2001.

  1. dfor

    dfor Veteran
    Messages: 60

    Is it as simple as just taking the bolt out and adding fluid or does it need to be bled afterwards. 8' Diamond. Thanks.
  2. 75

    75 Addict
    Messages: 1,382

    As long as air hasn't gotten into the system (I'm making the assumption you're just topping up) it's just a matter of remove the fill plug & add fluid. Make sure your lift cylinder is all the way down when you do this.

    If there is air in the system, you may need to enlist a helper to work the controls while you crack the fittings at the cylinders to get the air our.